1	14	22	103	1.5410	0.355	657	60.16	3.00	AAAC7/2.00
2	21	34	137	0.9900	0.349	1031	94.00	3.75	AAAC7/2.50
3	34	55	188	0.6210	0.345	1634	149.20	4.725	AAAC7/315
4	50	80	240	0.4250	0.339	2386	218.26	5.715	AAAC7/381
5	63	100	278	0.3390	0.335	2983	272.86	6.39	AAAC7/426
6	78	125	321	0.2735	0.333	3735	342.51	7.225	AAAC19/289
7	93	148	359	0.2290	0.33	4434	406.91	7.875	AAAC19/315
8	108	173	397	0.1969	0.329	5152	474.02	8.50	AAAC19/340
9	125	200	437	0.1710	0.327	5980	549.40	9.15	AAAC19/366
10	145	232	481	0.1471	0.315	6937	636.67	9.85	AAAC19/394
11	180	288	554	0.1182	0.282	8635	794.05	11.025	AAAC37/315
12	216	346	624	0.0984	0.266	10355	952.56	12.075	AAAC37/345
13	250	400	687	0.0829	0.261	11967	1101.63	12.985	AAAC37/371
14	291	465	757	0.0734	0.256	13902	1280.50	14.00	AAAC37/400
15	328	525	820	0.0651	0.252	14886	1448.39	14.895	AAAC61/331
16	356	570	865	0.0598	0.25	16173	1573.71	15.525	AAAC61/345
17	378	604	899	0.0568	0.244	17124	1666.00	15.975	AAAC61/355
18	401	642	935	0.0534	0.24	18189	1771.36	16.47	AAAC61/366
19	434	695	985	0.0492	0.237	19699	1919.13	17.145	AAAC61/381
20	479	767	1050	0.0446	0.235	21714	2115.54	18.00	AAAC61/400
Ex	Cu	Al	CC	R	X	UTS	Wt	rd	NAME


IMPORTANT:

This file contains DATA for 20 conductors meant for use in overhead lines.  The file must START from the 
first line and first column. The data are arranged in a systematic way. Any misplacement of data or abnormal
change (beyond limits) may cause error while including it in the PROGARM. The data are in the following 
sequence:

	1.	Conductor number
	2.	Cross sectional area in sq.mm. (Copper equivalent)
	3.	Cross sectional area in sq.mm. (Aluminium equivalent)
	4.	Current carrying capacity of conductor in Amps.
	5.	Resistance of conductor/km at 20°C in ohms
	6.	Inductive reactance /phase of OHL/km at 50 Hz.
	7.	Tensile strength of conductor in kg/sq.mm.
	8.	Weight of the conductor/ km in kg
	9.	Overall radius of the conductor in mm.
	10.	Name of the conductor

It is very important to note that the values in each column must either INCREASE SEQUENTIALLY or 
DECREASE SEQUENTIALLY ( in case of resistance and reactance).

You can make your own DATA file in this pattern and include in the Program.